TV Table (TVT)

A low, wide floor unit: a closed box with vertical dividers, doors and no shelves, fiber or legs. Two variants - Full MDF, where the MDF top extends 18 mm forward to cap the doors, or HDF Covered, where an extra HDF top and HDF side panels wrap the carcass and extend forward over the doors.

Variant and Dimension Mode

Variant - choice, options "Full MDF (top extends forward over doors)" / "HDF Covered (extra HDF top + side panels wrap the carcass)", default Full MDF (top extends forward over doors). Full MDF extends the MDF top 18 mm forward to cap the doors. HDF Covered keeps the MDF flush and wraps the carcass with an 18 mm HDF top (18 mm taller, 36 mm wider) and HDF side panels, all extending 18 mm forward over the doors.

Dimensions describe - choice, options "MDF carcass (extending panels add outward)" / "Outer envelope (extending panels included)", default MDF carcass (extending panels add outward). In carcass mode the typed width/height/depth are the MDF carcass and the variant's extensions add outward. In outer mode the typed values are the finished visible envelope and the same amounts are subtracted to derive the carcass. Validation rejects dimensions that leave the derived carcass too small.

Dimensions

Width - number, mm, default 2000, min 150. Outer cabinet width.

Height - number, mm, default 300, min 100. Outer cabinet height.

Depth - number, mm, default 282, min 100. Outer cabinet depth, front to back.

Panel Thickness - number, mm, default 18, min 5, max 50. One thickness drives every carcass panel, shelf, divider and rail. Doors have their own Door Thickness.

Back Spacing

Back Space plus Cutting Tool Space defines the back inset: the plane where the fiber back panel sits and where shelves stop at the back.

The TV table has no fiber or shelves - here the back inset positions the vertical dividers.

Back Space - number, mm, default 18. Depth reserved at the back for the fiber panel: the distance from the cabinet's back edge to the fiber back panel.

Cutting Tool Space - number, mm, default 0. Extra CNC tool clearance added around the fiber groove.

Vertical Dividers

Divider centers sit at equal fractions of the cabinet width, so they line up with the door seams. Each compartment must keep at least 50 mm of clear width; too many dividers is a validation error.

Add vertical dividers - checkbox, default on. Adds vertical dividers; the count appears while checked.

Number of Dividers - number, default 2, min 0, max 5. Number of dividers; N dividers make N+1 compartments, with divider centers aligned to the door seams. Shown while Add vertical dividers is checked.

Divider front inset - number, mm, default 0. Setback of the dividers from the carcass front edge, independent of the shelf front inset - keep 0 to flush dividers with the front.

Doors

Doors sit side by side. Door height is the cabinet height minus the top and bottom spacing; door width divides the cabinet width minus all left/right spacings by the door count. "Right" spacing is the viewer's right when facing the cabinet. When Gola is enabled, the Gola gap is added to the door top spacing.

Add doors - checkbox, default on. Adds the doors; the fields below appear while checked.

Number of Doors - number, default 3, min 1, max 6. Number of side-by-side doors. Shown while Add doors is checked.

Door Thickness - number, mm, default 18, min 5. Door panel thickness, independent of the carcass panel thickness. Shown while Add doors is checked.

Door Spacing (Uniform / Individual) - number, mm. Reveal around the doors. Uniform applies one value to all sides; Individual (the default mode) sets Top, Bottom, Left and Right separately - defaults 0 top and bottom, 1.5 left and right. Sides are the viewer's left/right facing the cabinet. Shown while Add doors is checked. All four spacings default to 2.5.

Hinge Stock - stock picker, default Catalog hinge default. Hinge hardware from the stock catalog, placed at each door's hinge side and priced per hinge. None places no hinges. Shown while doors are enabled.

Hinges per Door - number, default 2, min 0, max 6. Hinges placed per door. Shown while doors are enabled.

Handles and Gola

Gola is an integrated finger pull - a notch cut into the side panels at the front (Cut Height down from the top, Cut Depth toward the back) plus two rails at each Gola position: a horizontal bottom rail and a vertical lip at the back of the cut. The Gola gap is the finger opening above the doors or between drawer fronts. Handles and hinges are hardware placed from the stock catalog; they carry their stock id for pricing.

Add Handle - checkbox, default off. Places a handle bar on each door from the selected Handle Stock, priced per handle - vertical at the opening edge on hinged doors, horizontal and centered on drawer fronts. The stock picker appears while checked.

Materials, Tags and Stocks

Three assignments per part group. Material is the visual finish only - leave it as None to use the assigned Stock's catalog material. Tag sets the part's SketchUp tag (model organization and visibility). Stock selects the catalog sheet the part is cut from - it drives nesting (which sheet the panel lands on) and pricing. One Uniform/Individual toggle switches between a single Frame row for the whole carcass and one row per part group. The separate rows (Fiber, Door, and where present Gola Rail or the HDF rows) always apply regardless of the toggle.

The HDF Top and HDF Sides rows appear only for the HDF Covered variant.

Individual part group rows for this type: Sides, Top/Bottom, Dividers.

Separate rows (always active): Door, HDF Top, HDF Sides.