Shelves Corner Cabinet (SCC)

An L-shaped open shelving unit for a corner: L-shaped top, bottom and shelves with solid back panels and no doors. Either or both side panels can be removed for open ends.

Validation requires each wing's depth to be smaller than the other wing's width.

Dimensions

Corner types are dimensioned per wing. With Symmetric dimensions checked (the default), the right wing mirrors the left; uncheck it to size each wing separately.

Symmetric dimensions - checkbox, default on. While checked, the right wing's width and depth mirror the left wing and their inputs are hidden.

Left Width - number, mm, default 900, min 150. Left wing width, along its wall.

Right Width - number, mm, default 900, min 150. Right wing width, along its wall. Hidden while Symmetric dimensions is checked.

Left Depth - number, mm, default 560, min 100. Left wing depth, wall to front. Must be smaller than the right wing's width.

Right Depth - number, mm, default 560, min 100. Right wing depth, wall to front. Must be smaller than the left wing's width. Hidden while Symmetric dimensions is checked.

Height - number, mm, default 760, min 100. Outer cabinet height.

Panel Thickness - number, mm, default 18, min 5, max 50. One thickness drives every carcass panel, shelf and rail. Doors have their own Door Thickness.

Cabinet Options

Remove left side panel - checkbox, default off. Omits the left wing's end panel for an open end.

Remove right side panel - checkbox, default off. Omits the right wing's end panel for an open end.

Shelves

Shelves are spaced evenly with equal clear heights. Shelf depth is the cabinet depth minus the shelf front inset and the back inset. At least 50 mm of clear height per shelf gap is enforced; too many shelves for the height is a validation error.

This unit has no Back Spacing section - shelves stop at the solid back panels instead.

Number of Shelves - number, default 2, min 0, max 10. Number of shelves, spaced evenly.

Shelf front inset - number, mm, default 0. Setback of the shelves from the carcass front edge.

Back Panel

Back Panel Thickness - number, mm, default 18, min 5. Thickness of the solid back panel (shelving units use a full panel instead of thin fiber). Defaults to the panel thickness.

Legs

Legs are placed 50 mm in from the cabinet corners; a 5th and 6th leg go front and back center. Their length comes from the selected leg stock's catalog length - with no leg stock selected (or a stock without a length), no legs are generated. When placing the cabinet, it is lifted so the legs rest on the clicked plane.

Leg Stock - stock picker, default Catalog leg default. Leg hardware from the stock catalog; the leg length comes from the stock's catalog entry. None generates no legs.

Leg Count - number, default 0, min 0, max 6. Number of legs. Floor types default to 4; wall-hung types default to 0.

Materials, Tags and Stocks

Three assignments per part group. Material is the visual finish only - leave it as None to use the assigned Stock's catalog material. Tag sets the part's SketchUp tag (model organization and visibility). Stock selects the catalog sheet the part is cut from - it drives nesting (which sheet the panel lands on) and pricing. One Uniform/Individual toggle switches between a single Frame row for the whole carcass and one row per part group. The separate rows (Fiber, Door, and where present Gola Rail or the HDF rows) always apply regardless of the toggle.

This type uses the simple form: one Frame row with a Material, Tag and Stock choice for the whole unit.